TREN

DETAILS CREATING AWARENES

WINDOW PROPERTIES

MECHANISM PROPERTIES

The technical drawings given herein above and the direction marks on them show the direction, in which the mechanism can be opened

ACCESSORIES

Special accessories used in window and door systems, which have titanium coating, resistance against rusting for their entire life, which have multi - functional adjustment property and which are designed on the basis of security standards...

SUN GUARD

It is possible to apply more than one double glazing combinations in the product and it is possible to reduce U value of the glaze to 0.7 heat permeability ratio thanks to the special double glazing thickness of 37 mm as well as options of triple and double glazing.

PRODUCT TESTS PERFORMED AT TURKAK ACCREDITATION CERTIFICATE LABORATORIES

A high success has been obtained in the applied tests and all tests have been certificated.


  • Air permeability: TS EN 1026 ve TS EN 12207 - Category 4 (600 Pa)
  • Waterproofness: TS EN 1027 ve TS EN 12208 - Category 9 A (600 Pa)
  • Wind load: TS 4644 EN 12211 ye TS EN 12210 - Category C 3 (1200 Pa, L/300 compliant with the criterion)
  • Acoustic TS EN lSO 10140-2 ve TS EN ISO 717-1 : Rw (C ; Ctr ) = 36,3 ( -1,8 ; -4,6 ) dB
  • Static torsion resistance: TS EN 14609 ve TS EN 13115 - Category 4 (350 Newton)
  • U value TS EN 150 10077-1 ve TS EN ISO 10077-2 - Uw = 1,3 W/m2K

DETAILS CREATING AWARENES

TECHNICAL PROPERTIES

In the system, aluminum and wood are not combined in the form of installation from the upper side or lower side, but in the form of snap - on composite. By this way, it is not produced only for visual purposes, and the functional objectives of both the aluminum and the wood are kept in the foreground.

The wood is snapped on the internal part of the aluminum profile as an integrated whole with the profile through specially - produced canals and is pressed with a special - resin glue to produce a composite material. Massive wood profile is made of extra 1st class imported limba, chestnut, pine or mahogany timber and the wood is laminated consisting of 2 or 3 parts. By this way, the wood never operates and causes various turns.

CORNER JOINING

The corner joints of the product are made with 45-degree angles on the case profile, wing profile and wooden doubleglazing molding in order to ensure an integrity in the details so as to prevent the occurrence of asymmetric lines at the corner joints.

DOUBLE GLAZING MOLDING

In order to ensure that no worm formation occurs in the wooden glaze molding and that the corners are not opened in assembly, the 4 corners of the system are assembled in the form of a whole with 45- degree angles. Thanks to the "hidden special adaptor in the molding technique" that is developed by ALKOSAN for the first time in the world, full pressure by the double - glazing on the roving on the internal and external sides is ensured and the use of nails and screws is eliminated.

SECURITY

Special burglar — safe accessories are used in the system. In the AW series, the equipment holding the special internal accessories have special canals in order to prevent any breaks or bends in case of any external forcing.